{"product_id":"falcon-eyes-reflectorhouder-rbh-2566-w-statiefbu","title":"Falcon Eyes Reflectorhouder RBH-2566 w\/ Statiefbu","description":"\u003ch2\u003eFalcon Eyes RBH-2566 Reflector Holder: Keep a reflector in position\u003c\/h2\u003e\n\u003cp\u003eIn a studio, a reflector is most useful when it stays where you need it, even when you're working alone. The Falcon Eyes RBH-2566 Reflector Holder mounts around a lamp-stand tube measuring 19 to 30 mm, so the reflector doesn't need to be held by another person. Eccentric cams secure the holder to the stand, and spring clamps grip the reflector screen. Its adjustable length runs from 62 to 195 cm, giving you a broad range of placement for different screen sizes and lighting arrangements. That makes it a straightforward support for solo studio work: set a reflector beside a portrait subject to return light, or position one near a product setup to soften the contrast between lit and shaded areas. You can also change the holder's height and angle to position the screen where reflected light is needed. The RBH-2566 is an accessory rather than a complete stand, so it works with a compatible lamp stand you already have. For photographers who regularly move between reflector positions, its combination of stand mounting, spring clamps and adjustable reach keeps the setup focused on the screen rather than on finding someone to hold it.\u003c\/p\u003e\n\n\u003ch3 data-section=\"features\"\u003eStability and setup\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor reflector screens:\u003c\/strong\u003e The holder is made to support a reflector screen, keeping it in place while you work with the light in your setup. That makes it useful when a second person isn't available to hold the screen.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring-clamp grip:\u003c\/strong\u003e Spring clamps hold the reflector screen at the holder. This keeps the screen attached while you adjust its position, rather than relying on someone to keep it steady by hand.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEccentric-cam mounting:\u003c\/strong\u003e The supplied eccentric cams attach the holder to a lamp stand. They provide the connection between the stand and reflector support, so the reflector can be positioned as part of a standing studio setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable reach:\u003c\/strong\u003e The holder extends from 62 cm at its shortest to 195 cm at its longest. That span accommodates a range of screen placements, from a relatively compact setup to a longer reach beside the subject.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight and angle adjustment:\u003c\/strong\u003e After mounting the holder, you can set its height and angle to direct the reflector screen where you need it. This is useful when the same stand must serve different positions in a portrait or product-lighting arrangement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits a range of stand tubes:\u003c\/strong\u003e The mounting arrangement accommodates tubes from 19 to 30 mm in diameter. Check that your lamp stand's tube falls within that range before setting up the holder.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specialist-note\"\u003e\n\u003ch3\u003eSpecialist Note\u003c\/h3\u003e\n\u003cp\u003eThe RBH-2566 takes the extra pair of hands out of holding a reflector in a studio. I like that it combines a stand attachment with spring clamps: the cams connect it to the lamp stand, while the clamps hold the screen, so the support and the reflector stay together as one setup. The 62–195 cm adjustment is useful when you need the reflector close to a subject in one arrangement and farther out in another. For a solo portrait session, position the screen beside the subject and adjust its height and angle until it returns light where you need it; the same approach works beside a small product setup. It suits anyone working with reflector screens who already has a compatible lamp stand. One point to keep in mind: this is the holder, not a stand, and the stand tube must measure 19–30 mm.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFalcon Eyes RBH-2566 Reflector Holder\u003c\/li\u003e\n\u003cli\u003eEccentric cams\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Falcon Eyes\u003c\/li\u003e\n\u003cli\u003eModel: RBH-2566\u003c\/li\u003e\n\u003cli\u003eType: Reflector holder\u003c\/li\u003e\n\u003cli\u003eCompatible stand tube diameter: 19–30 mm\u003c\/li\u003e\n\u003cli\u003eMinimum length: 62 cm\u003c\/li\u003e\n\u003cli\u003eMaximum length: 195 cm\u003c\/li\u003e\n\u003cli\u003eReflector attachment: Spring clamps\u003c\/li\u003e\n\u003cli\u003eStand attachment: Eccentric cams\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Falcon Eyes","offers":[{"title":"Default Title","offer_id":57478612451668,"sku":"295566","price":22.77,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/2493\/3716\/files\/295566_01.jpg?v=1791469664","url":"https:\/\/www.htf-store.com\/ar\/products\/falcon-eyes-reflectorhouder-rbh-2566-w-statiefbu","provider":"Hard to Find Camera Store","version":"1.0","type":"link"}