{"product_id":"kaiser-rs10-reprostandaard","title":"Kaiser RS10 Reprostandaard","description":"\u003ch2\u003eKaiser RS10 Reprostandaard | A steady, measured setup for camera copying\u003c\/h2\u003e\n\u003cp\u003eCopying a print or document with a handheld camera means repeatedly judging height and alignment by eye. The Kaiser RS10 Reprostandaard uses a 100 cm column and a marked baseboard to give that work a fixed, measurable setup. It’s a camera reproduction stand for studio users who need to photograph flat subjects with consistent positioning, from prints and documents to artwork and other originals. The broad baseboard has a non-reflective matte grey surface, a printed grid and centimetre and inch markings, so you can place a subject against clear references. Its adjustable feet and built-in level address a basic but important part of reproduction: keeping the working surface level. The column is made from matte black anodised aluminium and is described as virtually vibration-free, a useful detail when small movements show up in close, carefully aligned images. A camera arm with 8 cm of horizontal correction adds a final positioning adjustment. The RS10’s appeal is its measured approach: the board, column and arm each provide a reference or adjustment, rather than leaving the setup to guesswork. For cataloguing, copying documents or making repeatable photographs of prints, that control is the point.\u003c\/p\u003e\n\u003ch3 data-section=\"features\"\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarked, non-reflective baseboard:\u003c\/strong\u003e The matte grey board measures 600 x 32 x 500 mm and has a printed grid with centimetre and inch scales. Those references make it easier to position flat originals consistently and keep track of their placement in the frame.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable feet with a built-in level:\u003c\/strong\u003e You can adjust the feet to set the stand’s height at its base, while the integrated level shows when the feet are even. This is especially relevant for reproduction work, where a tilted surface can complicate alignment between the subject and camera.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 cm marked column:\u003c\/strong\u003e The matte black anodised aluminium column has centimetre and inch markings and adjusts manually. Its near vibration-free construction provides a steady support for careful copying, while the scale gives you a readable reference when you change camera height.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight adjustment lock:\u003c\/strong\u003e A screw prevents the column’s height from being changed accidentally. That small safeguard matters when you’ve set up a camera position for a batch of originals and want the height to stay put while you work through them.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8 cm horizontal camera correction:\u003c\/strong\u003e The RTP camera arm can shift horizontally by 8 cm for fine positioning. Use that adjustment to centre an original beneath the camera without needing to reposition the subject on the grid for every small framing change.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum load of 4 kg:\u003c\/strong\u003e The RS10 supports a camera setup weighing up to 4 kg. That gives you a clear limit to use when planning a reproduction setup; the stand’s purpose is precise overhead positioning, not carrying a heavier studio rig.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-section=\"extra\"\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eThe camera mounting threads are reversible, with both 1\/4-inch and 3\/8-inch options. Kaiser also offers a range of accessories and replacement parts separately, so the RS10 can be paired with compatible additions from that range. These details are useful when planning the camera connection or looking to extend the stand’s setup over time.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKaiser RS10 Reprostandaard\u003c\/li\u003e\n\u003cli\u003eDust cover\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Kaiser\u003c\/li\u003e\n\u003cli\u003eModel: RS10\u003c\/li\u003e\n\u003cli\u003eType: Reproduction stand\u003c\/li\u003e\n\u003cli\u003eColour: Black\u003c\/li\u003e\n\u003cli\u003eColumn height: 100 cm\u003c\/li\u003e\n\u003cli\u003eBaseboard dimensions: 600 x 32 x 500 mm\u003c\/li\u003e\n\u003cli\u003eMaximum load: 4 kg\u003c\/li\u003e\n\u003cli\u003eColumn material: Anodised aluminium\u003c\/li\u003e\n\u003cli\u003eCamera arm: RTP, with 8 cm horizontal adjustment\u003c\/li\u003e\n\u003cli\u003eMounting threads: Reversible 1\/4-inch and 3\/8-inch\u003c\/li\u003e\n\u003cli\u003eBaseboard: Matte grey, non-reflective, with printed grid and centimetre\/inch markings\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kaiser","offers":[{"title":"Default Title","offer_id":57453500334420,"sku":"4105513","price":865.73,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/2493\/3716\/files\/4105513_01.jpg?v=1791321383","url":"https:\/\/www.htf-store.com\/es\/products\/kaiser-rs10-reprostandaard","provider":"Hard to Find Camera Store","version":"1.0","type":"link"}