{"product_id":"dji-sdr-transmission-2","title":"DJI SDR Transmission 2","description":"\u003ch2\u003eDJI SDR Transmission 2 | 4K wireless video for the whole crew\u003c\/h2\u003e\n\u003cp\u003eThe DJI SDR Transmission 2 uses a compact 136 g transceiver that works as either a transmitter or receiver. That small, two-way design keeps the wireless video link light on a camera rig and means the same unit can serve at either end of the setup. It sends DCI 4K video at 60 fps in 10-bit HDR, with latency from 35 ms, for detailed monitoring on set. One transmitter can feed up to eight receivers at the same time, so a director, focus puller and other crew members can all follow the same shot. For a moving camera setup, the link can travel up to 4 km under ideal CE conditions; the stated range is a maximum, not a promise for every location. The system also supports quick changes between camera positions: add a camera feed by scanning and connecting, without a separate pairing process. That’s useful when a production moves between angles or shares monitoring across a larger crew. HDMI and DisplayPort video connections cover common camera and device workflows, while the DJI Ronin app adds tools such as waveform, histogram, LUT and false colour. The SDR Transmission 2 also fits into compatible DJI Ronin setups, where it can draw power from the stabiliser.\u003c\/p\u003e\n\n\u003ch3 data-section=\"features\"\u003eWhat it does\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOne unit, TX or RX:\u003c\/strong\u003e Set the transceiver up as a video transmitter or receiver, depending on its role in your link. That flexibility is useful when building a kit around changing camera and monitor positions.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAutomatic channel management:\u003c\/strong\u003e Auto Channel 2.0 scans for available frequencies and can change channels when interference is detected. On busy sets, automatic channel handling helps keep nearby wireless groups from disrupting the video feed.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFast camera changes:\u003c\/strong\u003e A new camera feed can join by scanning and connecting, with no pairing sequence. That makes switching between camera positions less disruptive to a running production.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMonitoring tools in the Ronin app:\u003c\/strong\u003e The app provides LUT, histogram, waveform and false-colour views. These tools give crew members more ways to assess the image on a remote screen.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHDMI, DP and optional SDI:\u003c\/strong\u003e HDMI and DisplayPort connections carry video, with DP available through the lower USB-C port. SDI output is available with the separately sold Expansion Plate.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWireless bandwidth and responsiveness:\u003c\/strong\u003e The link supports a maximum bitrate of 50 Mbps, with minimum latency of 35 ms before camera and display delay. The actual end-to-end delay also depends on those connected devices.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 data-section=\"extra\"\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eThe SDR Transmission 2 is compatible with DJI RS 5, RS 4, RS 4 Pro and RS 3 Pro stabilisers, plus Ronin 2 and Master Wheels. Cable requirements vary: RS 4, RS 4 Pro and RS 3 Pro need a separately sold USB-C-to-CAN cable; Ronin 2 and Master Wheels need USB-C-to-4-pin. RS 5 connects by USB-C. A transceiver fitted to a stabiliser via its quick-release plate can’t sit in a native vertical position. This system can’t share a network with earlier DJI SDR Transmission or DJI Transmission products.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDJI SDR Transmission 2 transceiver\u003c\/li\u003e\n  \u003cli\u003eDJI SDR Transmission 2 camera shoe adapter\u003c\/li\u003e\n  \u003cli\u003eDJI SDR Transmission 2 NP-F battery adapter\u003c\/li\u003e\n  \u003cli\u003eUSB-C to USB-C firmware update cable, 50 cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBrand: DJI\u003c\/li\u003e\n  \u003cli\u003eModel: SDR Transmission 2\u003c\/li\u003e\n  \u003cli\u003eType: Wireless video transceiver\u003c\/li\u003e\n  \u003cli\u003eVideo transmission: DCI 4K at 60 fps, 10-bit HDR\u003c\/li\u003e\n  \u003cli\u003eMaximum bitrate: 50 Mbps; minimum latency: 35 ms, excluding camera and display delay\u003c\/li\u003e\n  \u003cli\u003eMaximum transmission distance: 4 km under ideal CE conditions\u003c\/li\u003e\n  \u003cli\u003eReceiver support: Up to eight receivers per transmitter\u003c\/li\u003e\n  \u003cli\u003eFrequency bands: 2.4 GHz, 5.2 GHz, 5.8 GHz and DFS frequencies\u003c\/li\u003e\n  \u003cli\u003eConnections: HDMI; USB-C for PD; lower USB-C for DP\/PD; SDI via optional Expansion Plate\u003c\/li\u003e\n  \u003cli\u003ePower: USB-C PD at 65 W minimum, NP-F battery or compatible gimbal\u003c\/li\u003e\n  \u003cli\u003eCompatibility: DJI RS 5, RS 4, RS 4 Pro, RS 3 Pro, Ronin 2, Master Wheels; Osmo Action 6 and Osmo Pocket 4 or later via DP\u003c\/li\u003e\n  \u003cli\u003eWeight and dimensions: Approx. 136 g with antennas; 76 × 61 × 25 mm, excluding antennas and shoe adapter\u003c\/li\u003e\n  \u003cli\u003eOperating temperature: -10°C to 40°C\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":57453496041812,"sku":"DJI-SDR-TRANSM-2","price":348.27,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/2493\/3716\/files\/DJI-SDR-TRANSM-2_01.jpg?v=1791321377","url":"https:\/\/www.htf-store.com\/nl\/products\/dji-sdr-transmission-2","provider":"Hard to Find Camera Store","version":"1.0","type":"link"}