Nedis Coaxial Cable IEC Coax M IEC Coax M Nickel Plated 50 Ohm OnShielded 1.90m

Nedis IEC Coax M to IEC Coax M Coaxial Cable, 1.90m | A direct coaxial connection

Rather than piecing together separate leads and adapters, this Nedis cable gives you one coaxial link with an IEC coax male connector at each end. It’s for a setup with a matching socket at both connection points, where a 1.90-metre cable suits the distance between them. The cable is rated at 50 ohms, and its connectors are nickel plated. That makes the key checks fairly straightforward: the connection needs to suit IEC coax plugs, the cable’s impedance needs to fit the job, and the length needs to reach without forcing the route. It’s a focused cable for making that specific connection, rather than a general-purpose lead. If the two sockets and the cable length match your setup, it keeps the connection direct.

Choosing the connection

Before you buy, look at the socket at each end of the intended route. This cable has male plugs, so it needs a female IEC coax socket at both ends; the names may be easy to overlook when you’re comparing cables. Measure the path the cable will actually take, rather than just the straight-line gap between devices. A route around furniture or along a wall can use more length than the distance between the connection points suggests. At 1.90 metres, this cable is best considered against that measured route. Avoid planning a tight pull: the plugs need to reach their sockets with the cable laid where you want it. That simple check helps you decide whether this particular length and connector arrangement suit the job.

Technical Specifications

• Connector 1: IEC coax male
• Connector 2: IEC coax male
• Impedance: 50 ohms
• Connector finish: Nickel plated
• Length: 1.90 m