Nedis Power Cable Type F CEE 7/7 Male IEC-320-C13 Angulated Nickel Plated 2.00m

Nedis Power Cable Type F CEE 7/7 Male IEC-320-C13 Angulated Nickel Plated 2.00m | A clear link between two power connections

Connect equipment with an IEC-320-C13 power connection to a Type F outlet with the Nedis Power Cable Type F CEE 7/7 Male IEC-320-C13 Angulated Nickel Plated 2.00m. It’s a two-metre cable with a CEE 7/7 male plug at one end and an IEC-320-C13 male connector at the other. The angled connector can be handy when a straight plug would project awkwardly from a device or sit close to a wall; the title doesn’t specify which end is angled, so check the connector shape against the space you have. This cable suits anyone replacing or choosing a lead with these specific connector types. Its 2.00m length gives you a set distance to work with, so it’s worth thinking about where the outlet and equipment will sit before you route it. No elaborate setup here: the key is matching both ends.

When choosing a power cable, start with the connections rather than the brand name. The wall-side plug is identified as Type F CEE 7/7, while the equipment-side connector is identified as IEC-320-C13. Those labels give you a straightforward way to compare this lead with the sockets you need to join. The angled form is another detail to consider if the cable has to leave a connection in a tight spot. Nickel plating is specified for the connector, and the cable measures 2.00m long. In practice, measure the route between outlet and equipment, leaving enough reach for the cable to lie without being pulled tight. A cable that’s too long can leave excess to manage; one that’s too short may limit where the equipment can sit. This Nedis lead is a specific connector-and-length option, not a universal substitute for every power cable.

Technical Specifications

• Brand: Nedis
• Product type: Power cable
• Plug: Type F CEE 7/7 male
• Connector: IEC-320-C13 male
• Connector shape: Angulated
• Plating: Nickel plated
• Length: 2.00m