ACT Conversion Cable DisplayPort Male To HDMI-A Male 5.00m

ACT Conversion Cable DisplayPort Male To HDMI-A Male 5.00m | Connect across a longer distance

Run a connection between a DisplayPort output and an HDMI-A input with the ACT Conversion Cable DisplayPort Male To HDMI-A Male 5.00m. It has a male DisplayPort plug at one end, a male HDMI-A plug at the other, and a 5.00-metre length. That makes it suited to a setup where the equipment needs to sit farther apart than a short cable allows, such as routing between positions across a room. The connector pairing is the key detail: this cable is for a DisplayPort-to-HDMI connection, rather than two matching sockets. Its extra length gives you more freedom when choosing where to place the connected equipment, though it’s still worth planning the route before plugging everything in. A cable like this is a straightforward answer when those two connector types need to meet.

Before you connect it, look at the available ports at both ends of your setup and make sure the cable’s male plugs can reach them along your intended route. Measure the path the cable will actually take, rather than just the straight-line distance between the devices; going around furniture or along a wall can use up more length. Leave enough slack for the layout, but avoid pulling the cable taut or pinching it behind equipment. The 5.00-metre length is the practical point to consider here: it can help when the devices aren’t side by side, while a shorter route may call for less spare cable to manage. Keep the connection path simple and accessible, so it’s easier to plug in or disconnect the cable when you need to adjust the setup.

Technical Specifications

• Product type: Conversion cable
• Connector 1: DisplayPort male
• Connector 2: HDMI-A male
• Length: 5.00m