Feelworld DC 12V 3A Power Adapter 100V - 240V AC 50 / 60Hz

Feelworld DC 12V 3A Power Adapter 100V - 240V AC 50 / 60Hz | Mains power for 12V DC equipment

Power equipment that calls for a 12V DC supply from an AC mains socket with the Feelworld DC 12V 3A Power Adapter. It accepts AC input from 100V to 240V at 50 or 60Hz and provides a 12V DC output rated at 3A. That makes it relevant when you need a mains-powered setup rather than relying on a battery—provided the equipment’s own power requirements match. The useful part is straightforward: the adapter’s stated input range covers different mains voltages, while its output gives you clear figures to compare against the device you plan to power. For a camera shop, those numbers matter more than a broad compatibility claim. I’d match the device’s required voltage and current before choosing a power supply, then make sure the connector and polarity are right too. This adapter is for a specific power requirement, not a universal answer for every piece of equipment.

When checking whether it’s suitable, start with the power information on the device or its existing adapter. The output voltage needs to be 12V DC; the device’s current requirement must also be appropriate for a supply rated at 3A. The AC input figures describe what the adapter takes from the mains, not what it sends to the powered equipment. Keeping those two sides separate makes the label easier to read and helps avoid choosing a supply based on the wrong number.

Its 50/60Hz input rating covers both common mains frequencies, and the 100–240V AC range gives the input figures in one place. Still, those details alone don’t identify the connector or confirm fit with a particular camera or accessory. Treat the device’s own power markings as the deciding reference. If they call for 12V DC and the other connection details match, the adapter’s stated rating gives you a clear basis for assessing it.

Technical Specifications

• DC output: 12V, 3A
• AC input: 100V–240V
• Input frequency: 50/60Hz