Nedis Charger | 100W| PD3.0 | Snellaad Functie | 2.5 / 5.0 A | USB-A /2X USB-C

Nedis Charger | One adapter, three charging ports

Running short of charging sockets can mean swapping cables just to keep devices powered. The Nedis Charger gives you one adapter with three ports: one USB-A and two USB-C. It’s suited to a desk, shared charging spot or travel bag where you want those different connector types available in one place. With 100W power and PD 3.0 fast charging, it’s designed for charging setups that call for more than a basic USB adapter. The listed current figures are 2.5 A and 5.0 A. That gives you concrete numbers to compare with the charging requirements of your device and cable. One honest point: the adapter’s headline power doesn’t tell you the rate every connected device will receive. That depends on the device, cable and charging arrangement. If you’re replacing a single-port charger or want USB-A and USB-C connections from one adapter, this Nedis model brings those options together.

Before you plug in

Start with the connector on the cable you intend to use: the available ports are a mix, so match the cable to the right socket. Then consider what you’ll charge and the rate it supports. The charger’s power rating is useful when comparing adapters, but it isn’t a promise that every device will draw the same amount. Devices and cables can affect the rate, so use a cable and charging setup suited to the device. If you’re choosing this for several devices, think about which ones need charging and which cables you already have. That simple check can help you decide whether the port mix fits your everyday setup, rather than relying on the wattage figure alone.

Technical Specifications

• Power: 100W
• Charging standard: PD 3.0
• Charging function: Fast charging
• Current: 2.5 / 5.0 A
• Ports: USB-A / 2× USB-C