ACT 5m DisplayPort Cable Male - Male Power Pin 20 Not Co

ACT 5m DisplayPort Cable Male-to-Male, Power Pin 20 Not Connected | A longer DisplayPort link with pin 20 disconnected

When a display needs to sit farther from its source, a short lead can dictate where everything has to go. The ACT 5m DisplayPort Cable gives you more reach between two DisplayPort connections, with a male connector at each end. Its distinguishing detail is that Power Pin 20 is not connected, so this is a specific cable configuration to choose when that matches your setup. It suits anyone looking for a longer male-to-male DisplayPort cable and who needs that pin arrangement. The 5-metre length can help when the route between devices runs around a desk or workstation rather than straight across it. Keep the decision simple: consider the connector type, the cable path and the pin detail together. If those are the requirements you’re trying to meet, this ACT cable spells them out clearly.

Planning the cable route

Before settling on a cable, trace the path it needs to take between the two connection points. Measure along that route, including any turns around furniture or equipment; measuring only the gap between the devices can leave you short. It’s also worth thinking about where the cable will enter each device, so the ends can reach without pulling the equipment out of position. A little extra slack may make placement easier, but avoid leaving more cable in the way than your setup needs. At each end, look for the DisplayPort connection that accepts a male plug. The disconnected Power Pin 20 detail matters if your setup depends on a particular pin arrangement, so treat it as part of the match rather than an incidental label. That’s the practical check: route, connection and pin detail all need to suit your use.

Technical Specifications

• Brand: ACT
• Cable length: 5 m
• Connection type: DisplayPort
• Connector configuration: Male to male
• Power Pin 20: Not connected