Hama USB-Cable A-A USB 2.0 480 MBIT/s 1.50 M

Hama USB-Cable A-A USB 2.0 480 MBIT/s 1.50 M | A straightforward USB-A connection

For a setup designed to link two matching USB-A sockets, this cable provides a direct connection without changing connector type. The Hama USB-Cable A-A USB 2.0 480 MBIT/s 1.50 M has a USB-A plug at each end, a stated transfer rate of 480 Mbit/s and a length of 1.50 metres. It suits someone replacing a cable in an existing USB-A-to-USB-A setup, or arranging a connection where that specific format is required. Its appeal is its simple, familiar layout: there’s no connector conversion built into the cable. The length gives some room to route it across a desk or between nearby connection points. One honest point: A-A is a specific format, so this cable is for setups designed for it, not a general replacement for every USB lead.

Choosing the connection

Think of this as a cable for a particular connection layout, rather than an accessory that adds a new port to a device. Start by looking at the two sockets you need to link and make sure the intended connection calls for matching USB-A ends. That’s the practical detail to get right before choosing a cable; a suitable length won’t help if the connector format doesn’t match the setup. The stated rate gives you a clear reference for the cable’s USB 2.0 specification, though actual transfer results can depend on the connected devices and what you’re doing with them. Once the connection format is right, the job is simple: connect the two points and route the cable where it needs to go. This Hama cable keeps that task uncomplicated, with the same connector type at both ends and a clear length and speed specification to guide your choice.

Technical Specifications

• Connector format: USB-A to USB-A
• USB standard: USB 2.0
• Transfer rate: 480 Mbit/s
• Length: 1.50 m
• Colour: Black