ACT Conversion Cable DisplayPort Male To DVI Male 1.80m

ACT Conversion Cable DisplayPort Male To DVI Male 1.80m | Connect DisplayPort to DVI

ACT Conversion Cable DisplayPort Male To DVI Male 1.80m gives you a 1.80-metre link between a DisplayPort connection and a DVI connection. It’s for anyone who needs to join equipment with those two port types using a single cable, rather than assemble a connection from separate parts. The cable has male connectors at both ends, so it’s intended to plug into matching female ports. Its clearest use is connecting a DisplayPort source to a DVI display. That direction matters: don’t assume a conversion cable will work in reverse just because the plugs fit. The 1.80m length gives you some room to position the connected devices, while keeping the connection direct. It’s a straightforward option when the ports at either end are already known and match the cable’s connectors.

Before you connect

Start by identifying the port on the equipment sending the signal and the port on the display receiving it. For this cable, look for DisplayPort on the source side and DVI on the display side, then make sure each end has a socket for the cable’s male plug. That simple check can save you from choosing a cable with the right names in the wrong arrangement. Also consider where the equipment will sit: 1.80m is the stated cable length, so take the route between the two connection points into account. This is a focused cable for a specific DisplayPort-to-DVI connection, not a general-purpose lead for unrelated ports. If the ports match and the direction suits your setup, the connection is easy to understand before you buy.

Technical Specifications

• Type: Conversion cable
• DisplayPort connector: Male
• DVI connector: Male
• Length: 1.80m