SWIT ADPV16 ADPV16 | 12V-3A 36W 4-PIN XLR Power Adaptor-ADPV16-X4

SWIT ADPV16-X4 12V 36W 4-Pin XLR Power Adaptor | A focused power match for four-pin XLR setups

Without a dedicated adaptor, powering a rig means finding a supply with the right rating and plug. The SWIT ADPV16-X4 brings those requirements together in a 12V, 3A, 36W format with a four-pin XLR connection. It’s a power adaptor for equipment designed to accept that connection and electrical rating, rather than a general-purpose charger. That makes it most relevant when you need those specific values and connector, and less useful if your equipment calls for something else. The clear benefit is that you can compare its stated rating and connector directly with the power requirements on your equipment or existing supply. The model designation is ADPV16-X4. One honest point: matching the XLR plug alone isn’t enough; the electrical requirements need to match too.

When comparing replacements, read the equipment label first, then check the supply you’re replacing. Match the voltage and connector, and make sure the equipment’s current requirement is within the adaptor’s stated capacity. Also check that it’s specifically a four-pin XLR connection; connectors with different pin counts aren’t interchangeable just because they share the same general shape. If your device specifies a different voltage, connector or greater current requirement, don’t assume this model will suit it. With power adaptors, a careful label check is more useful than guessing from a product photo. Keep the exact model reference alongside the connector and rating when comparing options, so you can distinguish this adaptor from other products in the same broad category. It’s a focused part, not a universal power solution.

Technical Specifications

• Product type: Power adaptor
• Model: ADPV16 / ADPV16-X4
• Voltage: 12V
• Current: 3A
• Power: 36W
• Connector: 4-pin XLR