ACT USB 2.0 A Male - USB B Male (Angled) 1.80m

ACT USB 2.0 A Male - USB B Male (Angled) 1.80m | A direct USB link with an angled plug

It’s frustrating to find the right cable for two devices and then discover the plugs don’t match. This ACT cable has a USB 2.0 Type-A male connector at one end and a USB Type-B male connector at the other, giving you a direct connection when your equipment has those corresponding ports. The USB-B end is angled, which can be handy when a straight plug would be awkward beside the device or cable. At 1.80 metres, it gives you some room to position the connected equipment without choosing a longer cable by default. This is a straightforward option for someone replacing a cable or putting together a setup that specifically calls for USB-A to USB-B. The important detail is the connector pair: match those shapes to the ports you need to join. It’s a practical, specific cable, rather than a multi-connector solution.

Choosing the right connection

USB-A and USB-B refer to different connector shapes, so this cable has a clear direction in terms of which end goes where: the A plug connects to the matching A port, and the B plug to the matching B port. The angled shape applies to the USB-B plug; the title doesn’t specify its angle or orientation, so allow for the way it will sit beside your equipment when planning the cable route. Its stated length is 1.80 metres. Consider the distance between the two connection points and how the cable needs to run, especially if a straight plug would get in the way. If your setup calls for USB 2.0 with these two connector types, this is the configuration to look for.

Technical Specifications

• USB version: USB 2.0
• Connectors: USB Type-A male to USB Type-B male
• USB-B connector: Angled
• Cable length: 1.80m