Hama Glasvezel-Network Cable SC/Apc-Plug - SC/Upc-Plug 10 GBIT/s 6.00 M

Hama Fibre Optic Network Cable, SC/APC Plug to SC/UPC Plug, 10 Gbit/s, 6.00 m | A fibre link for a 6-metre route

Without a ready-made cable, connecting two network points can mean choosing separate parts and assembling a link to suit the route. This Hama fibre optic network cable gives you a single cable with an SC/APC plug at one end and an SC/UPC plug at the other. It’s for a setup that calls for those two connector types, in that order, and a cable rated at 10 Gbit/s. The 6-metre length is a practical fit when the equipment isn’t right beside each other but the route is still within reach. Use it to link compatible network equipment with the matching ports; the connector names matter here, so they’re worth comparing with the sockets at both ends before setting the cable in place. The cable is white. That’s a small detail, but it can make it easier to spot along a light-coloured wall or beside other leads.

Plan the cable run

Think about the path between the two connection points, not just the straight-line distance. A cable usually needs some slack at each end, and the route may turn around furniture or follow a wall. With 6 metres to work with, you can judge whether this is a sensible length for your layout before routing it. The two plugs are different types, so each end has a particular place in the connection: SC/APC on one side and SC/UPC on the other. Keep that orientation in mind as you bring the cable to the equipment, rather than treating both ends as interchangeable. Its stated 10 Gbit/s rating makes it relevant where that link speed is required; the rest of the network setup also needs to support the intended connection. It’s a straightforward cable choice when the connector pair, speed and route all match your installation.

Technical Specifications

• Product type: Fibre optic network cable
• Connector 1: SC/APC plug
• Connector 2: SC/UPC plug
• Data rate: 10 Gbit/s
• Length: 6.00 m
• Colour: White